Looking for our retail site? Click here.
Delkin Devices 1.8" SATA SSD

Industrial 1.8″ SSD

Product Highlights

  • SATA II 3 Gb/s (Backward compatible to SATA I)
  • 8 – 256GB SLC, 16 – 512GB MLC
  • -40 to 85°C Operating Temp
  • Read / Write Speeds up to 240/190 MB/s*

*Capacity Dependent

Product Description

Delkin Devices’ S218 Series 1.8” SATA SSD is the ideal HDD replacement for embedded applications, delivering industrial temperature storage in a compact SFF-8144** compliant form factor. Both SLC and MLC NAND options are available, in a wide array of capacities, to address applications ranging from an OS load to video recording. The S218 Series is rugged, built to withstand shock, vibration, and harsh environmental conditions.

As with all Delkin industrial products, the S218 Series is built with a controlled bill of materials, with the flash, controller and firmware locked in the part number. Delkin also understands that life cycle management is critical for industrial customers. Every possible measure is taken to extend product life cycles, but when the inevitable EOL does occur, Delkin has an advance notification process which gives customers the opportunity to place a last time buy and qualify a replacement part.

Delkin recognizes that an off-the-shelf part may not always be the best fit, and provides many customization options – ranging from custom labels, serialization, content and image loading, conformal coating, custom testing, even a complete custom design. Contact us to ask how we can customize a drive for your application.

In addition to the 1.8” SATA SSD, other SATA form factors Delkin offers are the S225 2.5” SSD, mSATA (MO-300B), mini-mSATA (MO-300B mini), SlimSATA (MO-297) and CFast

**SFF-8144 controlled by the Small Form Factor Committee.

Delkin Industrial 1.8” SSD Part Numbers

CapacityS218 Series w/ SLC FlashS218 Series w/ MLC Flash

Technical Specifications


Operating Temp
-40 to +85°C

Storage Temp
-50 to +100°C

10G, 11msec – Sawtooth Waveform

20Hz – 1000Hz @ 0.04 G2/Hz,
1000Hz – 2000Hz @ 0.01 G2/Hz

Reliability / Endurance

SLC: 3750 TBW
MLC: 188 TBW

> 2 million hours (0 to +25°C)
> 200,000 hours (60°C)

Capacity Range

8GB – 256GB

16GB – 512GB


Sequential Read up to 240MB/s
Sequential Write up to 190MB/s

Sequential Read up to 240MB/s
Sequential Write up to 150MB/s

1Per MIL-STD-810G, Method 516.6 Procedure I. Testing to other shock profiles available upon request.

2Per MIL-STD-810G, Method 514.6; Category 24. Testing to other vibration curves available upon request.

3TBW figures are representative for 64GB capacity based on optimal usage model. Contact Delkin for life estimates on other capacities or using your specific usage parameters.

4Performance figures shown are for highest capacity configuration, and will vary by capacity, host, usage model and other factors.


  • Drop-in replacement for 1.8” SATA HDD
  • Industry standard 1.8” form factor with Serial ATA interface
  • Compliant with SATA Revision 2.6 specification (3 Gbps / 1.5 Gbps)
  • Fully compatible with ATA-7; Supports transfer modes PIO 0-4, MDMA 0-2 and UDMA 0-6
  • Supports TRIM & Native Command Queuing (NCQ) up to 32 commands
  • Supports ATA Security Erase
  • Advanced wear-leveling and ECC
  • True rugged, industrial drive with custom-designed case and under-fill for critical components
  • SMART enabled for monitoring performance and managing product life in application
  • Protection against data and firmware corruption during power loss
  • Customizable – conformal coating, labeling, content loading, etc.
  • Compliant with European Union Directive 2011/65/EU (RoHS)

SATA Devices

Industrial 1.8″ SSD

Delkin Devices’ S218 1.8” SATA SSD is the ideal HDD replacement for embedded applications, delivering industrial temperature storage in a compact SFF-8144** compliant form factor.

learn more

Industrial 2.5″ SSD

For legacy SATA designs with a standard 2.5” HDD or SSD slot (SFF-8201 form factor*) the Delkin Devices’ S225 delivers a controlled industrial solution in two flash grades and a wide range of capacities.

learn more

Industrial mSATA SSD

When a SATA-based design calls for a board-level storage solution, the mSATA (JEDEC MO-300B standard) is the true embedded option selected by many engineers.

learn more

Industrial Mini mSATA SSD

For real estate constrained hosts needing a true embedded SATA storage module, Mini mSATA (JEDEC MO-300B Mini standard) is the ideal solution, delivering up to 64GB of SLC or 128GB of MLC in less than 8 cm2 (1.25 in2.)

learn more

Industrial SlimSATA SSD

Utilizing the same connector as a standard 2.5” HDD or SSD, the uncased SlimSATA form factor (conforming to the JEDEC MO-297 standard) is an excellent alternative for embedded applications not restricted to the mechanical outline of a traditional hard drive.

learn more

Industrial CFast

For embedded platforms which have used CompactFlash as a boot drive or other storage medium, and now face a migration from PATA to SATA due to a processor change, CFast is a logical choice for new designs.

learn more

Order Sample

Note: Requests for samples are considered on a case-by-case basis and are available for B2B Industrial customers only.
Looking for our consumer retail website? Visit www.delkindevices.com

  • This field is for validation purposes and should be left unchanged.

Contact Delkin

We'd Love to Hear From You

Have questions on product configuration samples for compatibility and qualification testing?